รับเหมาปรับปรุงเครื่องฉีดพลาสติกให้ประหยัดพลังงานด้วย HYBRID SERVO
ปรับปรุงระบบไฮดรอลิกปั้ม ที่ควบคุมด้วย Motor ธรรมดา เป็นระบบ Hybrid Servo
โดยจะต้องทราบข้อมูลของเครื่องเก่าดังนี้
- Max. work pressure of the system(kg/cm^2)
- Max.system flow(L/min), (Originally Motor rate speed and pump displacement)
- Max. work voltage: Delta’s system provides 220V& 380V
- Check Signal on Pressure and Flow command valve whether 0-10 V or 0-1A
ตัวอย่างเช่น
- Max. pressure system : 140bar(kg/cm^2),
- Originally Motor rate speed : 978rpm & Fix pump displacement: 65cc/r , Max. flow system to calculation = 978rpm*65cc/r=63.5L/min
- Input voltage:380V
- Structure of a Hybrid Energy System: HES063G43A(refer to page 13 & 19)
ก่อนที่เราจะทำการเปลี่ยนระบบจำเป็นจะต้องเก็บค่าต่างๆไว้ดังนี้
- Operation time per cycle.
- Total mold production quantity per 1Hr and to recorder 8 Hr.
- Pressure holding time.
- Cooling time.
- Mold reference number.
- Plastic melted time.
- Total power consumption per 1Hr_ by power meter and to recorder 8 Hr .
![]() |
| ตัวอย่างการวัดค่าพลังงานก่อนติดตั้งระบบ Hybrid Servo |
![]() |
| ข้อมุลก่อนเปลี่ยน |
![]() |
| ข้อมูลหลังเปลี่ยน |
![]() |
| อุปกรณ์ Hybrid servo |
![]() |
| ตัวอย่างการดูเนมเพลท Motor |
![]() |
| ตัวอย่างการดูเนมเพลทความจุ Pump |
สนใจงานติดตั้งระบบ Hybrid Servo เพื่อประหยัดพลังงานสำหรับควบคุมปั้มติดต่อด้านล่าง






























ไม่มีความคิดเห็น:
แสดงความคิดเห็น